Business Consulting

 

We have a passion for Innovation. Many of our products have patented or patent pending technology. Just look at some of the advantages of our LED's below:

Increase sales, production, customer and employee satisfaction

MOST PEOPLE ONLY THINK OF COST SAVINGS FROM LED LIGHTS/FIXTURES. HERE IS THE REALITY. YOU MIGHT PAY FOR THE LED LAMPS/FIXTURES THOUGH OTHER BENEFITS THAT ARE NORMALLY OVERLOOKED. PRODUCTS CAN LOOK BETTER UNDER LED LIGHT THAN TRADITIONAL TYPES OF LAMPS. YOUR EMPLOYEES WILL TYPICALLY HAVE HIGHER PRODUCTION AND LESS EYE STRAIN UNDER THE IMPROVED LIGHT. SECURITY SYSTEMS ARE MORE EFFICIENT AT NIGHT WITH HIGHER QUALITY LIGHT. YOUR PROPERTY WILL APPEAL TO MORE PEOPLE AS THE BRIGHTER THEY ARE, THE MORE SAFE THEY ARE PERCEIVED AS BEING. MANY TOP COMPANIES HAVE DONE STUDIES THAT FIND SALES GO UP UNDER BETTER LIGHT CONDITIONS. LIGHTING MAINTENANCE COST ARE VIRTUALLY ELIMINATED FOR MANY YEARS AFTER THE RETROFIT. THINK ABOUT ALL ASPECTS OF YOUR BUSINESS WHEN REVIEWING LED LIGHTING RETROFITS, NOT JUST THE IMMEDIATE ENERGY SAVINGS ON YOUR ELECTRIC BILL!


Savings:
From 50% to 90% cost reduction on the lighting portion of your electric bill (lighting typically represents 25% to as much as 60% of business total electric bill).

Reliability:
10, 7, or 5 year warranty. No yearly replacement cost, better visibility creates safer work area (warranty term is published for each lamp type). 

Environmentally Friendly:
No mercury, No heavy metals, No special disposal fees or HAZMAT handling process.

Our flood lights, high bays, shoe box retrofit kits, and streetlights are tunable:

You can adjust the lumen/wattage up or down. This will give you additional options that could save even more money over existing lighting cost. You will have complete control over the light lumen output and wattage used on each streetlight. Our streetlights are among the highest rated in the world! Now over 3,000,000 in service.

Lumens per watt: 
Our lamps have anywhere from 105 to 185 lumens per watt. Many other companies on the market have anywhere from 70 to 120 lumens per watt.

Our LED lighting products enable you to receive the highest quality at the best value:  
Our factory direct approach enables us to provide top quality products meeting rigorous independent testing standards such as UL, DLC, Energystar, LM79, LM80, ETL, and IES Photometric standards.  We offer a lease for our LED lighting which requires little money out of pocket to invest in our superior technology products ($2,500 minimum order for lease funding). 

Industry Leading Heat Dissipation Technology (Patented)
Controlling Junction thermal temperature is critical to building a reliable LED lighting product.  Our patented heat spreading technology enables our engineers to design products which quickly dissipate heat to insure junction temperatures remain below 65 degrees. Because of our low heat dissipation and low temperatures, our LED products enable mechanical systems (HVAC) to work more efficiently, and as a result, turn on less frequently thus reducing wear and tear on equipment while saving money.

Reliability and Warranty: 
Quality cannot be tested into an LED lighting product. It starts from the design concept and a detailed understanding of the environmental pressures this light will be challenged with overcoming. Design the best products, use superior components, perform 100% dynamic burn-in and temperature cycling to remove infant mortality before shipping, and remove heat rapidly from the lighting engine to provide customers leading quality and a leading warranty with no fine print. Use light in its intended application for 24 hours per day, every day, and insure proper operating voltage between 100V and 305V, and our product is covered by our warranty. Please see our warranty for complete details.

Our manufacturer has been designing and manufacturing LED lighting since the 1990's with proven results surviving some of the harshest environments. Our outdoor streetlights have been installed in 29 countries from the frozen tundra to hot, humid deserts. With tens of millions of field deployed units installed, we are recognized as an industry leader in LED lighting. 

Dual Switching Driver Technology (DSDT - Patented): 
Heat is the enemy for producing long lasting LED lighting products. Too many companies focus solely on cost by using fewer components and over driving these components to produce higher light output.  

This technique creates hot spots, higher fading rates, color shifting, and premature failure of drivers, capacitors, and inductors.  Because our engineers control the design and development of products manufactured and because our team understands the difference between Cost of Purchase (COP) and Cost of Ownership (COO), we have successfully developed robust, redundant driver technology, which exceeds the needs of commercial and industrial customers. When designing LED lighting, the heavy lifting is power conversion from AC to DC while maintaining constant current and removing heat. The LED chips themselves are proven and capable of operating more than 150,000 hours. The problem is the power conversion part of the lamp that fails first (Driver, Capacitor, and Inductor). By inventing DSDT technology, our manufacturer drives our LED chips at 50% of the LED manufacturers' rated current specification, thus enabling heat to be removed, less stress on circuits, and provide the ability to produce long lasting LED products.

Our manufacturer puts quality first by using two drivers to reduce drive current using custom designed capacitors that last 150,000 hours or more and special designed inductors for making our products robust and temperature and voltage resistant.  Although our products cost more to manufacture, eliminating distributors and middlemen allows us to compete head to head against any worldwide supplier.


UL, DLC and Energystar certifications for most products: 
The LED industry is littered with companies that have claimed to have reliable and high performance products only to end up in the garbage can 1 year later.  Designing LED lighting products is a science and requires the mastery of many disciplines.






















Our manufacturer has mastered these skill sets to design and manufacture extremely reliable and affordable lighting products for the commercial, industrial, and municipal marketplace.  

Plug N Play Technology: 
Our manufacturer designed and popularized Plug N Play LED lighting products in the marketplace as a way of reducing the cost of converting to LED lighting. This may sound easy, but it is actually quite difficult to achieve. Our designers focused on design and compatibility testing for 16 months before releasing this technology in 2011.  There are many types of ballasts associated with traditional lighting, so their approach was to work with the top 10 traditional lighting manufactures of ballast products to design form, fit, and functional equivalence without removing the ballast from your traditional light source. Utilizing your current fixtures can save money on your lighting retrofit. Many customers ask us about the benefits of using Plug N Play lighting technology, so below is a short outline of the benefits:

Plug N Play Benefits:
Easy to install: Just remove your old lamp and install our Plug N Play LED
Power consumption reduced by up to 75%!
Light output increased 15% to 25%,

no flicker
No Electrician Required


Field repairable LED driver technology (Patented): 
Failures sometimes happen, and it can be a cumbersome and expensive process for customers to return products and have suppliers ship replacements. When an LED fails, 99% of the time the failure is the driver board meaning either the driver chip, capacitor, or inductor component failed due to loose solder connection, stress, heat, or over voltage. It is for this reason and convenience we designed the Field Repairable Power Interface (FRPI) which is a connector based power board similar to those used in automotive audio systems and is resistance to heat, vibration, and noise for connecting the T8 LED tube. This solution enables us to eliminate wires (cold solder joints), vibration from noise or heating, and cooling expansion/contraction and enables field replacement to occur in minutes. We now ship customers extra power boards for stocking at their facility (at no charge), and in the event a T8 tube fails, power can be replaced and light re-installed in less than 2 minutes.

UL or ETL certifications on ALL LED products: 
Human safety, fire safety, proper operation, and protection from shocking voltage are extremely important concerns for our customers and their installers. This is why 100% of our products are tested and certified to meet the stringent requirements of UL and ETL. This protects your investment, your employees, and contractors from unsafe products. These certifications require auditors visiting our factory every three months to inspect the manufacturing line, product design, inventory, and insuring no component changes have been made which affect the safe operation and use of these products. Our manufacturer has always passed these audits and has maintained these certifications for the past 10 years without a single violation!

ALL orders shipped come with 2% additional products at NO CHARGE: 
From time to time, an electronic component may have a mind of its own and stop working properly. This is rare but does happen. Because we understand proper lighting is important for customers to operate their business smoothly and time is money, we do not want to burden our customers with time consuming RMA  process and then have customers waiting for replacements.  This is why we created the “SMART RMA” and ship 2% above your order as safety stock. This means you receive an extra 2% quantity above your order quantity, enabling inventory to be kept as in-house stock at your facility thus providing the ability to immediately replace any light field failure. If a light happens to fail, simply replace light from your safety stock, call our customer service, and return the failed product. We perform 100% failure analysis to determine the root cause of failure and use this information to continuously improve our manufacturing process for improving our quality and testing.

MOVs inside (surge protection): 
Most lamps proposed for your business will have built in MOV's. These are very high quality MOV's that exceed industry standards (15kv in most products). Don't let a power surge damage your lighting. Only buy lamps with built in MOV's.

Wallpacks: 
All of our wallpacks are hermetically sealed and now have a waterproof rating of IP67 or IP68. Keeps dust and bugs out of your fixtures. This is one of the reasons we can stand behind out wallpacks like no other company. Moisture can get into a fixture and potentially affect the lifespan and performance of the lamp. This is not the case with our wallpacks!

Shoe box retrofit kits: 
Our shoe boxes are tunable. That means you can adjust the lumen and wattage output on the lamp. It is important to note that you can actually put out more lumens than is listed in the datasheet. This will allow you to tune up the lamp at a later date to get an average of 10 to 15 years of acceptable light output from each shoe box. Our shoe box kits are IP67 waterproof rated to ensure moisture stays out of the fixture. The kits don't require the changing out of the old head. This makes our kits less expensive than most of our competitors that require the entire head be replaced with the upgrade.

Additional features include Replaceable Lenses on our floodlights.

10, 7, or 5 year unlimited usage warranty (warranty term is product specific.

Please check each product for specific warranty term): 
Our manufacturers have gone to great lengths to design the BEST LED lighting engine by focusing on durable, proven and reliable components, which translates hard work into customers receiving the best LED products. When reading competitors warranty terms, one typically would need to be an attorney to understand the fine print and determine the real warranty. One popular LED supplier provides a 5 year warranty, but when you read the details, it applies to products operational for only 3 hours per day. Our suppliers keep it simple! Design the best products, using superior components, perform 100% dynamic burn-in and temperature cycling to remove infant mortality before shipping to customers and remove heat from the lighting engine. This methodology enables us to provide our customers with a leading industry warranty with no strings attached. Use light for intended use and use for 24 hours per day. Insure voltage is between 90V and 305V, with inline surge protection, and the product is covered by our warranty. Please see each product datasheet for specific warranty terms.